Product ID:2-CYCLE OIL, CPS226486
MSDS Date:12/13/1991
FSC:9150
NIIN:00N047234
MSDS Number: CDMYX

CHEVRON ENVIRONMENTAL HEALTH CENTER

RICHMOND, CA 94804-0054
US

Emergency Phone: 415-233-3737

Info Phone: 415-233-3737

Cage: 0AHD1

CHEVRON ENVIRONMENTAL HEALTH CENTER INC

4054 RICHMOND, CA 94804 US

Telephone: 800-582-3835

Cage: 0AHD1

WEARING PROTECTIVE CLOTHING INCLUDING GLOVES.

RTECS: 9999999ZZ

DISCOLORATION, SWELLING, & BLISTERING.

RTECS: 9999999ZZ

BEEN DETERM. HOWEVER, IT SHOULD BE PRACTICALLY

RTECS: 9999999ZZ

HAZ EVALUATION IS BASED ON DATA FROM SIMILAR MATLS.

RTECS: 9999999ZZ

SIGNS & SYMPS OF CNS EFTS MAY INCL ONE/MORE OF THE

RTECS: 9999999ZZ

OF COORDINATION. THIS HAZ EVALUATION IS BASED ON

RTECS: 9999999ZZ

THIS SUBSTANCE HAS NOT BEEN DETERM. HOWEVER, IT

RTECS: 9999999ZZ

MINERAL OIL,PETROLEUM DISTILLATES, HYDROTREATED (SEVERE),

CAS: 64742-54-7

RTECS: PY8035501

OSHA PEL 5 MG/M3 MIST (MFR)

ACGIH TLV: 5 MG/M3 MIST (MFR)

MINERAL OIL, PETROLEUM DISTILLATE, SOLVENT DEWAXED

CAS: 64742-65-0

RTECS: PY8038501

OSHA PEL N/K

ACGIH TLV: N/K

HEAVY PARAFFINIC)

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

KEROSENE (PETROLEUM), HYDROTREATED; (DISTILLATES,

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: <20.0%

OSHA PEL N/K

ACGIH TLV: N/K

ADDITIVES

Fraction By Weight: <10.0%

OSHA PEL N/K

ACGIH TLV: N/K

FIRE HAZARD IS GREATER AS LIQUID TEMPERATURE RISES

RTECS: 9999999ZZ

ANY SIGNS/SYMPS AS DESCRIBED IN THIS

RTECS: 9999999ZZ

IF

RTECS: 9999999ZZ

ADVICE. DO NOT MAKE PERSON VOMIT UNLESS DIRECTED TO

RTECS: 9999999ZZ

THEN TAKE THE PERSON AND PRODUCT CONTAINER TO THE

RTECS: 9999999ZZ

WHERE IT IS TO BE USED. STOP THE SOURCE OF THE

RTECS: 9999999ZZ

TO PVNT FURTHER CONTAM OF SOIL, SURF

RTECS: 9999999ZZ

SUCH AS SORBENT MATL/PUMPING. WHERE FEASIBLE &

RTECS: 9999999ZZ

REPORTING AND RESPONDING TO LARGER RELEASES.

RTECS: 9999999ZZ

CAN BE AVOIDED BY WEARING CHEM GOGGLES. AVOID

RTECS: 9999999ZZ

LUBRICATING BASE OIL (MULTIPLE CAS# INVOLVED) (CONTAINING

Fraction By Weight: >70.0%

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT DEWAXED RESIDUAL OIL (PETROLEUM); (RESIDUAL OILS

CAS: 64742-62-7

OSHA PEL 5 MG/M3 MIST (MFR)

ACGIH TLV: 5 MG/M3 MIST (MFR)

SOLVENT REFINED HYDROTREATED RESIDUAL OIL; (RESIDUAL OILS

CAS: 64742-57-0

OSHA PEL 5 MG/M3 MIST (MFR)

ACGIH TLV: 5 MG/M3 MIST (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:THIS SUBSTANCE IS SLIGHTLY IRRIT
TO THE EYES & COULD CAUSE PRLNG (DAYS) IMPAIRMENT OF YOUR VISION.
THE DEGREE OF THE INJURY WILL DEPEND ON THE AMT OF MATL THAT GETS
INTO THE EYE & SPEED & THOROUGH NESS OF THE FIRST AID TREATMENT.
SIGNS & SYMPS MAY INCL PAIN, TEARS, SWELL, REDNESS, & BLURRED (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:VISION. SKIN:THIS SUBSTANCE IS A MOD
SKIN IRRITANT SO CNTCT W/SKIN COULD CAUSE PRLNG (DAYS) INJURY TO
THE AFFECTED AREA. THE DEGREE OF INJURY WILL DEPEND ON THE AMT OF
MATL THAT GETS ON THE S KIN & THE SPEED & THOROUGHNESS OF THE FIRST
AID TREATMENT. SIGNS & SYMPS MAY INCL PAIN/FEELING OF HEAT, (ING
20)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH IMMED W/FRESH H*2O FOR AT LEAST 15 MIN WHILE
HOLDING THE EYELIDS OPEN. REMOVE CNTCT LENSES IF WORN. NO ADDNL
FIRST AID SHOULD BE NEC. HOWEVER, IF IRRIT PERSISTS, SEE A DOCTOR.
SKIN:REMOVE CO NTAMD CLTHG. WASH SKIN THOROUGHLY W/SOAP & H*2O. SEE
A DOCTOR IF ANY SIGNS/SYMPS DESCRIBED IN THIS DOCUMENT OCCUR.
DISCARD CONTAMD NON-WATERPROOF SHOES & BOOTS. WASH CONTAMD CLTHG.
INHAL:IF (ING 10)

Flash Point Method:PMCC
Flash Point:176F,80C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP . FOR
FIRES INVOLVING THIS MATL, DO NOT ENTER ANY ENCLSD/CONFINED FIRE
SPACE W/OUT PROPER PROT EQUIP, (SUPDAT)
Unusual Fire/Explosion Hazard:COMBUST PROD: NORMAL COMBUSTION FORMS
CARBON DIOXIDE & H*2O VAP; INCOMPLETE COMBUST CAN PRODUCE CARBON
MONOXIDE. INCOMPLETE COMBUST CAN PRODUCE CARBON MONOXIDE.

Spill Release Procedures:CERTAIN GEOGRAPHICAL AREAS HAVE AIR POLLUTION
RESTRICTIONS CONCERNING THE USE OF MATLS IN WORK SITUATIONS WHICH
MAY REL VOLATILE COMPONENTS TO THE ATM. AIR POLLUTION REGS SHOULD
BE STUDIED TO DETERM I F THIS MATL IS REGULATED IN THE AREA (ING
14)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT USE OR STORE NEAR FLAME, SPARKS
OR HOT SURFACES. USE ONLY IN WELL VENTILATED AREA. KEEP CONTAINER
CLOSED.
Other Precautions:DO NOT WELD, HEAT/DRILL CNTNR. RESIDUE MAY IGNITE
W/EXPLO VIOLENCE IF HEATED SUFFICIENTLY. CAUTION! DO NOT USE PRESS
TO EMPTY DRUM/EXPLOSION MAY RSLT. READ & OBSERVE ALL PRECS ON PROD
LABEL. DO NOT GE T MATL IN YOUR EYES. EYE CNTCT (ING 18)

Respiratory Protection:NO SPECIAL RESPIRATORY PROTECTION IS NORMALLY
REQUIRED. HOWEVER, IF OPERATING CONDITIONS CREATE HIGH AIRBORNE
CONCENTRATIONS, THE USE OF AN NIOSH APPROVED RESPIRATOR IS
RECOMMENDED.
Ventilation:USE ADEQUATE VENTILATION TO KEEP THE AIRBORNE
CONCENTRATIONS OF THIS MATERIAL BELOW THE RECOMMENDED EXPOSURE
STANDARD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC:INCLUDING SELF-CONTAINED BREATHING APPARATUS. LIQUID
EVAPORATED & FORMS VAPOR (FUMES) WHICH CAN CATCH FIRE & BURN WITH
EXPLOSIVE VIOLENCE. INVISIBLE VAPOR SPREADS EASILY & CAN BE SET O N
FIRE BY MANY SOURCES SUCH AS PILOT LIGHTS, WELDING EQUIPMENT, &
ELECTRICAL MOTORS & SWITCHES. (ING 9)

Spec Gravity:0.87 @ 15.6C
Solubility in Water:INSOLUBLE
Appearance and Odor:BLUE LIQUID.
Percent Volatiles by Volume:20

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
PEROXIDES, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:PLACE CONTAMINATED MATERIALS IN DISPOSABLE
CONTAINERS AND DISPOSE OF IN A MANNER CONSISTENT WITH APPLICABLE
REGULATIONS. CONTACT FEDERAL, STATE, LOCAL, ENVIRONMENTAL OR HEALTH
AUTHORITIES FOR APPROVED DISPOSAL OF THIS MATERIAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.